Precision Parts Forming Machinery
Tool Design And Manufacturing

Hilgeland, Kiserling, Nutaphttp://www.ewmenn.de
Deutsch | English | 中文 | Español | Italiano | Français
You are here: News » Releases

Releases

Fastener Fair Italy 2024

Thank you for visiting us at the Fastener Fair in Milano!

We at WAFIOS Umformtechnik GmbH had a very good time connecting with many fastener professionals!
A huge thank you to everyone who stopped by the CARUTTI booth to learn more about our products and services!



>> more

Success Story: China

"We would like to express our heartfelt thanks to our valued Chinese customers, with whom we have had the pleasure of speaking in person over the last ten days!

We would also like to thank our colleagues at WAFIOS Shanghai Machinery, who have given us such active support.



>> more

FASTENER + FIXING MAGAZINE

Tool developement made by WAFIOS Umformtechnik



>> more

wire 2024 in Düsseldorf was a complete success!

The WAFIOS Umformtechnik exhibition stand at wire 2024 was packed to the brim last week...three new machines as trade fair innovations, a completely overhauled retrofit machine and two thread rollers from our sister company EWMenn have proven to be real crowd magnets.

The new HC 6-80A...



>> more

VDKM Event - Cable & Wire West Coast

Make sure to use this opportunity to get in contact with more than 20 companies from the wire and cable processing industry!

November 7 and 8, 2023 in the
Ontario Convention Center in California, USA

Lecture Series "Special Machine Construction" Guarantees Insights into Practice

In cooperation with the Machine Building Network Bergisch Land, the Chair of Design at the University of Wuppertal is organizing a series of lectures on the topic of "Special Machine Design" in the coming winter term which is not only open to students but interested parties are also cordially...



>> more

The New, Innovative WAFIOS Parts Output

Innovative, clean transport of parts out of HC 4 cold forming machines



>> more

WAFIOS at wire&tube 2022 (20.-24.06.)

Discover the WAFIOS fair exhibits at the wire&tube '22 and book a visit.



>> more

Lectures at the University of Wuppertal

At the end of 2021, WAFIOS Umformtechnik GmbH was invited to give lectures at the University of Wuppertal. The topic: "Initial Design and Component Design" as part of the special mechanical engineering lecture series, a cooperation with the Bergisch Land mechanical engineering...



>> more

JANUS PERSPECTIVE 01/22

Fastener + Fixing Magazine

Jens Gutsche, managing director
In 2020 our company turned 100 years old, something our employees, the management, and the entire WAFIOS Group, are very proud of. Unfortunately, we were denied an anniversary celebration with our customers and business partners due to the Covid-19...



>> more

Workshop "Forming with Induction Wire Heating"

In Wuppertal on the 05.10.2021., with this as the topic, WAFIOS forming technology experts met wire heating experts from HIMMELWERK.


For some years now, there has been a trend towards induction wire heating - which has recently increased sharply - especially in the forming of...



>> more

Passing the Baton with the "Focus on the Future"

After 20 years involvement in the management of the company, Jutta Leib is retiring from WAFIOS Umformtechnik GmbH. A successor for the commercial management of the company, Andreas Pawelzig, has been successfully found and has assumed his duties with effect from the 1st of July, 2021.



>> more

JANUS PERSPECTIVE

Jens Gutsche, managing director, The economic development of German machine building has, apart from slight fluctuations, increased quite steadily over the last ten years.



>> more

High-Performance ND Tandem Double-Blow Cold Former for the production of long blanks up to 300 mm

The model ND tandem double-blow forming cold formers have been designed for the production of blanks for drywall screws, wood screws, sheet-metal screws (DIN 7970) and similar parts in wire from 2.2 up to 5.2 mm dia.



>> more

International FASTENER Show China (11. - 13. June 2019)

The participation of WAFIOS Umformtechnik at the International FASTENER Show China exceeded all expectations.



>> more

The Forming Experts meet in Wuppertal

From the 8th to the 11th of May, WAFIOS AG once again held an in-house exhibition under the roof of its subsidiary, WAFIOS Umformtechnik GmbH in Wuppertal, formerly the company Hilgeland.



>> more

Its New Machines

On May 8-11, the Wafios Group exhibited new machines at Wafios Umformtechnik's open air facilities in Wuppertal.



>> more

Second-hand machinery overhauls by WAFIOS Umformtechnik

WAFIOS Group provides overhaul on the brands of its own such as WAFIOS Umformtechnik, EWMenn, Hilgeland, Nutap. MRP, Formatech, Kieserling in line with the demand of the customers bringing the 2nd hand machines used for many years to WAFIOS facilities to complete overhaul process and delivered back...



>> more

Jens Gutsche new Managing Director at WAFIOS Umformtechnik GmbH

Wuppertal, September 1st 2017 – Dipl.-Ing. (FH) Jens Gutsche will be the new Managing Director at WAFIOS Umformtechnik GmbH.



>> more

high-precision rolling dies

In addition to our machine- and plant-design, we also produce high-precision rolling dies for threads or for molded parts. For more than 20 years, we have also been a licensed EJOT® rolling dies supplier. After the acquisition of the K-, Delta- and Altracs-profiles, we also have now the license to...



>> more

Press Release: Wuppertal, 27.07.2015

Machine construction company WAFIOS Umformtechnik GmbH in Wuppertal has taken over with immediate effect EWMenn GmbH & Co. KG located in Hilchenbach, a company which also manufactures machines for the fastener industry. Through this merger, WAFIOS Umformtechnik becomes one of the most capable...



>> more

Newsletter edition 03/2016

Newsletter Download (PDF 1 MB)



>> more

Even Titanium is not hard enough for our machines

Competitive edge using HILGELAND and KIESERLING formers for the production of fasteners made from high alloys for applications in the aerospace industry



>> more

AEO

WAFIOS Umformtechnik GmbH was Awarded EU Accreditation as Authorized Economic Operator Full (AEOF) on May 23, 2012



>> more